1”–3.1”
25–79 mm
Cable O.D.
Up to 12
Cables/Conduits at a time
4 mph
6.5 km/h
Max speed
2,084 lb
945 kg
Weight
Machine Features
- Heavy duty, strong, rugged design
- Easily insert or remove cables mid-run
- Infinitely adjustable guide rollers both before and after cables are wrapped
- Strong tie-down points
- Index rollers keep cables from twisting before they are wrapped
- Minimal maintenance required — just grease the bearings daily before operation
- Lifting rings on top of the machine
- Usable with the Excavator Adapter
- Wraps MV cables in trefoil, flexible duct and conduit, or any combination of duct and cables
General Specifications
Cable size range
1” – 3.1” (25 – 79 mm) outside diameter
Cable types
Not limited by cable type within the size range
Cable quantity
Up to 6 cables, or up to 12 conduits running doubles — ground wire and fiber can be included
Speed
No minimum speed 4 mph (6.5 km/h) maximum
Wrap pattern
Mechanical — no change in pattern with speed
Wrap usage
Varies with cable diameter (see usage estimates below)
Physical Dimensions
A – Length
7’-9” (236 cm) rollers in
10’-8” (325 cm) rollers out
Weight
2,000 lb (907 kg) no wrap
2,084 lb (945 kg) full wrap
B – Height
4’-10” (147 cm)
C – Width
4’-3” (130 cm)
ESTIMATED VELOCIWRAP® USAGE
Cable
Outside diameter
Wrap strand spacing
Wrap usage
1250 kcmil MV triplexed cable
2.408” (61.2 mm)
6.5” (165 mm)
Trench feet + 25%
4/0 AWG MV triplexed cable
1.527” (38.8 mm)
7.5” (191 mm)
Trench feet + 8%